Marine Mortar S - Structural Concrete Repair Mortar for Marine and Tidal Areas (BBA

Marine Mortar S - Structural Concrete Repair Mortar for Marine and Tidal Areas (BBA

Overview

Marine Mortar S is used for the structural repair and profiling of vertical, horizontal and overhead surfaces in marine and tidal areas which are subject to early immersion.

Marine Mortar S is a thixotropic, fibre reinforced, polymer modified, cementitious mortar with excellent cohesion for use in areas subject to early immersion. It cures rapidly to produce a high strength mortar with enhanced polymeric properties for the repair of voids in aggressive marine environments. Marine Mortar S is supplied as a two component system in pre-weighed quantities ready for on-site mixing and use, requiring no extra additions of water or aggregate and is suitable for application thicknesses up to 50mm.

Advantages

• Pre-packaged material only requiring simple mixing.
• Physical properties of cured materials are similar to base concrete.
• Thixotropic mortar which allows easy trowel application whilst enabling high application thicknesses in both vertical and horizontal situations.
• Low shrinkage and high bond strength ensure monolithic performance of the repair.
• Fibre reinforced to improve tensile and impact strength. Superior to tensile strength of concrete. Excellent low sag properties.
• Dense matrix provides excellent protection against the ingress of acid gases, moisture and chlorides.
• Excellent resistance to wash-out soon after application.
• Economic, polymer modified, fibre reinforced cementitious repair mortar.
• Non toxic when cured.

Specification Clause

The repair mortar shall be a thixotropic, fibre reinforced, polymer modified, cementitious mortar, and shall be CE marked in accordance with BS EN 1504-3 Class R4. It shall be BBA Certified and comply with the following performance specification:

• Compressive strength at 20°C of at least 15-20 MPa in 1 hour and 50-60 MPa in 28 days
• Free plastic shrinkage of no more than 0.02% at 28 days
• Bond strength of 33-36 MPa in accordance with BS 6319 – Part 4 Slant Shear Method
• Impermeable to water under 10 bar hydrostatic pressure such that 10mm of mortar is equivalent to 3000mm of concrete.