Fosroc Conbextra EP

Uses for grouting under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical spillage may occur.

Typical applications include:

 Reciprocating machinery

 Testing equipment

 Heavy crane and transporter rails

 High speed turbines

 Centrifuges

 Drop forges

 Electroplating and chemical plants

 Anchoring of steel bars

Advantages

 Low creep characteristics under sustained loading

 Resistant to repetitive dynamic loads

 Non-shrink, ensuring complete surface contact and bond

 High compressive, tensile and flexural strengths

 Fast, convenient installation with rapid strength gain

 Withstands a wide range of chemicals

 Two grades available for gap widths 0.25 - 10 mm and 10 - 120 mm

Description

Conbextra EP are epoxy resin based products designed for free-flow grouting of gap thicknesses from 0.25 to 120 mm. Two grades of product are available: Conbextra EP10 for grouting gap thicknesses from 0.25 to 10 mm. Comprising of a two component, low viscosity unfilled epoxy resin system which is mixed and poured into the gap. Conbextra EPR for grouting gap thicknesses from 10 to 120 mm. A three-component system consisting of base resin, liquid hardener and specially graded inert fillers, which are mixed and poured into the gap.