Steel Reinforcement Protector 841 – Flexcrete

Steel Reinforcement Protector 841 – Flexcrete Class R7 Reinforcement Corrosion Protection

Uses Corrosion preventative, flexible coating to protect steel reinforcement prior to the application of the relevant FLEXCRETE REPAIR MORTARS.

Advantages

Brush applied in two coats with minimal inter-coat waiting time. Economic coating gauged as required to the correct consistency using mixing kit provided. High alkalinity and corrosion inhibitors rapidly reinstate passivating layer around reinforcement to give long term corrosion protection. Tolerant to lower levels of steel preparation. Dense matrix protects the steel from aggressive acid gases, moisture and chlorides. High insulation properties prevent further electrochemical corrosion. Produces a hard coating with a degree of elasticity. Excellent adhesion to steel ensures adequate pull-out resistance is achieved. Non toxic when cured.

Compliance CE marked in accordance with BS EN 1504 Part 7. Authorised under Regulation 31 for use in the supply of drinking water. Approved by the BBA, Certificate No. 05/4276.

Product Description STEEL REINFORCEMENT PROTECTOR 841 consists of two components, a cementitious powder and a polymer dispersion which react chemically together to passivate, with the aid of corrosion inhibitors, and protect steel reinforcement. STEEL REINFORCEMENT PROTECTOR 841 has excellent adhesion to steel and concrete allowing high bond strengths with FLEXCRETE REPAIR MORTARS. STEEL REINFORCEMENT PROTECTOR 841 forms a highly alkaline coating with a degree of elasticity which not only protects the steel from aggressive acid gases, moisture and chlorides, but passivates the steel surface chemically to prevent further rust formation.

Pack size 5kg

Coverage A 5kg pack applied in two coats in sufficient for approximately 45lm of 10mm diameter steel bar.

Safety Data Sheet Available on request